xlpe black for cable

Cross-linked polyethylene, which is said xlpe to be made of polyethylene, is based on linear light density polyethylene LLDPE and heavy density polyethylene.

An obvious xlpe feature is the increase in mechanical and thermal properties compared to polyethylene.

This process turns polyethylene into cross-linked polyethylene

It greatly increases its mechanical properties and temperature tolerance so that it can perform better xlpe cables than pvc.

Xlpe Black is one of the most widely used cross-linked polyethylene granules, which is coated with soot carbon and used in cable factories.
xlpe black for cable creates a strong protective layer on the outer surface of the cable that is most resistant to mechanical and thermal stresses.

The advantages of the product can be high mechanical properties ,anti-uv , acid rain position ,excellent conductivity , high thermal resistance , no Drying and …

Pitaris factory, a producer of xlpe black and xlpe natural, has the ability to supply xlpe for cable factories and traders with the best quality and conditions.
xlpe is always important in the cable industry and greatly improves the quality of work, especially for high voltages and sensitive places, so the supply of xlpe is very important.

xlpe black granola

Low-temperature impact strength, abrasion resistance and environmental stress cracking resistance can be increased significantly by crosslinking, whereas hardness and rigidity are somewhat reduced.

xlpe does not melt any more (analogous to elastomers) and is thermally resistant (over longer periods of up to 120 °C, for short periods without electrical or mechanical load up to 250 °C). With increasing crosslinking density also the maximum shear modulus increases (even at higher temperatures)

A low degree of crosslinking leads initially only to a multiplication of the molecular weight. The individual macromolecules are not linked and no covalent network is formed yet. Polyethylene that consists of those large molecules behaves similar to polyethylene of ultra high molecular weight like a thermoplastic elastomer.

Upon further crosslinking the individual macromolecules are eventually connected to a network. This crosslinked polyethylene is chemically seen a thermoset, it shows above the melting point rubber-elastic behavior and can not be processed in the melt anymore.
The degree of crosslinking is different in intensity depending on the process. According to DIN 16892 at least the following degree of crosslinking must be achieved:

in peroxide crosslinking (PE-Xa): 75%
with silane crosslinking (PE-Xb): 65%
with electron beam crosslinking (PE-Xc): 60%
in azo crosslinking (PE-Xd): 60%

Supplier xlpe black

Pitaris Manufacturer of Crosslinkable HDPE Compound for multilayer Pipe and Crosslinkable LLDPE Compound for Cable

Produces xlpe natural and xlpe black, distributes and sells directly. Our goal is to create the best conditions and supply goods for traders and consumers. You can contact us and check our products.


Packing:25 KG special bags


xlpe black in china

xlpe black in china

Cross-linked polyethylene(xlpe) ,xlpe black china Used in cable industries and cable factories

xlpe black Insulated Steel Wire Armored PVC Sheathed YJV32 Power Cables, copper conductor, XLPE insulation, PVC inner sheath, steel wire armoured, PVC out sheath, U0/U: 0.6/1kV.

It applies to electrical power transmission and distribution lines with AC rated voltage U0/U up to and including 0.6/1kV. For outdoor and indoor installation in damp and wet locations, laid directly in the ground where excessive mechanical stresses are present in sloping and moving terrains and in vertical or inclined laying, as well as in locations susceptible to sliding.

What is xlpe black

Also known as Cross-linked Polyethylene, XLPE is a very good insulation in terms of electrical properties. XLPE has very high insulation resistance, a stable dielectric constant over all frequencies, and a low dielectric constant.

Features & Advantages of xlpe black Wire & Cable:
In terms of flexibility, polyethylene can be rated stiff to very hard, depending on molecular weight and density (low density being the most flexible). Black and specially formulated colored versions have excellent weather resistance.

  • Moisture resistant
  • Impressive electrical and physical properties
  • xlpe cables are capable of carrying large currents due to excellent thermal resistance
  • Easy to Install and maintain with cables being light in weight

Manufacturer granule xlpe black

Petaris Company is a manufacturer of PE wax, cross-linked polyethylene (XLPE) in the Middle East, which sells its products according to technical sheets and catalogs.
The main focus of this company is to export the best quality xlpe black for the market
Pitaris has provided direct supply of xlpe to cable companies with good conditions

The Chinese market Due to the high consumption of plastics and leading in the field of polymers, the production of high pressure power cables is important for this market, so the supply of xlpe black China is important for traders.

Crosslinkable LLDPE Compound Pitaris

one of the products of Pitaris company Crosslinkable LLDPE Compound(xlpe) ,The products are used in the form of granules for power cables and five-layer pipes
This product with high thermal and mechanical resistance is important for industries.

Pitaris is ready to cooperate with the best conditions for cable factories to provide a strong network of production and supply.
Products with special packaging and vacuum 25 kg
Email us for advice and purchase of products